1970 Fox Minibike Part 4

To see if the engine would fit in, the original chassis was stripped.  Here you see the front and rear suspension being removed from the Fox.


Next, all the plastic parts were removed from the pit bike and more measuring was done.
The Fox engine plate was definitely in the way, so it was removed from the frame courtesy of Mr. Dewalt.
A cut was made ahead of the rear upper spring mount on the pit bike, basically severing the bike in half.


I removed the engine from the pit bike frame to ease trial fitting into the Fox bike.  Here, the first positioning helps me figure where it needs to sit in the frame while also maintaining the suspension mounting angle.  


Stay tuned for the next instalment!

Comments

Post a Comment

Popular posts from this blog

1970 Fox Minibike Part 10- It’s Alive!

Image
As the tires on the pit bike were worn out, a choice had to be made as to what would replace them.    The little 2.50x 10 size is available in many styles and brands. I ordered a pair of Michelin Starcross tires as they had an aggressive knobby pattern.     It was also a chance to remove the wheel bearings from the hubs and put new ones in.     One of them was a bit loose in the bore, so a prick punch was gently hit in several places to raise the surface the bearing sat in.     I couldn’t find new wheels at reasonable prices, so a good rubbing with Autosol made them shine as much as possible.     The new small tires were tough to install, as the bead is stiff.     Dish soap and patience prevailed! Well, after three months of working on the bike project, the day came to fire it up and take it for a spin.     I changed the oil and put a new drain plug gasket on, not knowing when or if ever the oil had ...
Read more

Classic Mini bike Engines

Image
Making a Tecumseh Snowblower Engine Look Vintage As a kid, the Honda bikes were what we dreamed of owning.  Their motorcycle feel with steering head bearings and a transmission were high end features in a day when lawnmower type flathead engine powered mini bikes were the norm.  I remember as a kid, looking for the reel type lawnmowers that had horizontal shaft engines.  Hoping to find one no longer being used and pulling the engine off to put on a mini bike I didn’t even have at that point!  They were around in the late 60s, early 70s, but were usually 2 or 2.5 hp maximum.  My first “go kart” was one my Dad built, using parts from an old baby carriage and a sheet of plywood.  I pestered Dad until he finally conceded to find an engine to bolt onto the back of it.  I believe it was 1967 or 1968 in Ancaster when we found an old outdoor wringer washing machine engine.  Yes, gasoline powered washing machines were common up to the 1960s....
Read more